I installed my 760 Val in my RV6 and could not get any reception. The FBO said he could hear the transmission clearly. I can hear the squelch when I check it so I reasoned it was not a headset or wiring issue. Sent the radio to Val to get checked out, they said there was nothing wrong with it and sent it back. I wanted to make sure it was not an intercom issue so I wired the jacks directly to the comm bypassing the intercom. Made sure jacks were isolated from the panel and all wires were correct. Tuned in the local AWOS and could not hear anything unless the squelch knob as pulled out. I am ready to test fly my RV6 after a major rebuild, but not without communications. Any suggestions on what to try next?
JKearns
Kearns Metal Works
N35K
JKearns
Kearns Metal Works
N35K