SOLD!!! — RV-14 Project

[bjdecker]

I am selling an RV-14 (Tail Dragger) Quick Build Kit (Empennage, Fuselage, Wings).
All major subassemblies complete except for fiberglass closeouts (e.g. Vertical Stabilizer, Horizontal Stabilizer, Rudder, Elevators).
Fuselage and Empennage are joined together, controls installed, systems installed.

Changes/Upgrades from standard kit:
ANDAIR FS20 Type 7 fuel selector (changed from Type 20)
TS/AS Flightlines brake lines cabin and firewall forward.
TS/AS Flightlines fuel “hard” lines in cabin
EarthX ETX900 battery + Aluminum Tray (installed)
JD Air Canopy Latch installed
JD Air Tailwheel Assembly and Steering Link installed
Van’s Foredeck Access Panels installed
Cowling attach flange (instead of hinges) installed

QB Wings and QB Fuselage were primed using the Updated primer from Vans circa 2021.
QB Wings and QB Fuselage do not include any laser cut parts.
Empennage parts were primed with SEM.

All it needs is the Finishing Kit, Firewall Forward accessories and your choice of Avionics.
All work completed by 5 time RV builder.

Asking US $66K

PM for more information, pictures, etc.

Brian

 

[rocketman1988]

I am selling an RV-14 (Tail Dragger) Quick Build Kit (Empennage, Fuselage, Wings).
All major subassemblies complete except for fiberglass closeouts (e.g. Vertical Stabilizer, Horizontal Stabilizer, Rudder, Elevators).
Fuselage and Empennage are joined together, controls installed, systems installed.

Changes/Upgrades from standard kit:
ANDAIR FS20 Type 7 fuel selector (changed from Type 20)
TS/AS Flightlines brake lines cabin and firewall forward.
TS/AS Flightlines fuel “hard” lines in cabin
EarthX ETX900 battery + Aluminum Tray (installed)
JD Air Canopy Latch installed
JD Air Tailwheel Assembly and Steering Link installed
Van’s Foredeck Access Panels installed
Cowling attach flange (instead of hinges) installedView attachment 60322View attachment 60323View attachment 60324View attachment 60325View attachment 60326

QB Wings and QB Fuselage were primed using the Updated primer from Vans circa 2021.
QB Wings and QB Fuselage do not include any laser cut parts.
Empennage parts were primed with SEM.

All it needs is the Finishing Kit, Firewall Forward accessories and your choice of Avionics.
All work completed by 5 time RV builder.

Asking US $66K

PM for more information, pictures, etc.

Brian

If only I wasn't holding out for the -15...

 

[BruceW]

So . . . . . tempting.

 

[rvmills]

For those peeking at Brian's project here...FWIW, his local nickname/call-sign 'round here is "Showplane"...'cause his work is that good. He's the guy we call when we want to make sure we make something for, or fix something on, our planes, and do it right. Good guy too!

Just a reference, for wading through this Caveat Emptor world!

Cheers,
Bob

 

[bjdecker]

So . . . . . tempting.

…all the cool kids have one