I need to fine tune my fuel computer. As many have posted, the fuel flow shows much more fuel than is actually being used, mainly due to the fuel return line that we have on our RV-12s. I get the fuel mismatch warning on almost every start, and it is always off by at least 30%, even with my "K" factor set at 85000. I have found some mention of changing the return parameters, but I can't find that field in the hardware setup menu. I have no problem getting to the "K" factor, but I would really like to get the return parameters right first. I found no help in "search", or at Dynon's site. Can anyone guide me through getting to the return field in the Skyview system.
Thanks in advance............Tom
Thanks in advance............Tom