I'm at the stage where I need to drill holes for the rudder placement. I see the Vans recommends a minimum of 3 inches for maximum leg room, as well as drilling multiple holes for adjustment,
I'm 5'6" with a 30 inch inseam, can any one give me a good place to start as well as how far they spaced the multiple holes for adjustment.
I realize once the seat is in that will be the final verdict, but just looking for a starting point.
Thanks
I'm 5'6" with a 30 inch inseam, can any one give me a good place to start as well as how far they spaced the multiple holes for adjustment.
I realize once the seat is in that will be the final verdict, but just looking for a starting point.
Thanks