I booted up the system connected as per Vans instructions for the first time and everything seemed to work well.
I?ve updated the system to v5.1 and subsequently added the EMS data files, maps, etc.
After running a Network Configuration, two servos, ADAHRS and display were found and updated. (Nothing displayed for GPS or Xponder, but no error msgs either).
I have been having nightmares about my ability to forget a cable or a connection during that long Section 32, but everything seemed to work as expected, and I felt really happy: No red crosses on the display, but the three panels, though not what I expected them to be...
1. My PFD shows the plane to be upside down, though the ADAHRS is correctly positioned per plans. (there is a warning to calibrate compass though)
2. Map shows location at Dynons HQ, ~4950 miles away from Barcelona (Spain) were I?m located.
3. System goes hand-to-hand with the Master switch. Should it be always on when the master is on? Any way to power it of before disconnecting Master? (I?ve tried holding key 1 and reboots again)
Any similar experiences out there? Thanks in advance
Godo
I?ve updated the system to v5.1 and subsequently added the EMS data files, maps, etc.
After running a Network Configuration, two servos, ADAHRS and display were found and updated. (Nothing displayed for GPS or Xponder, but no error msgs either).
I have been having nightmares about my ability to forget a cable or a connection during that long Section 32, but everything seemed to work as expected, and I felt really happy: No red crosses on the display, but the three panels, though not what I expected them to be...
1. My PFD shows the plane to be upside down, though the ADAHRS is correctly positioned per plans. (there is a warning to calibrate compass though)
2. Map shows location at Dynons HQ, ~4950 miles away from Barcelona (Spain) were I?m located.
3. System goes hand-to-hand with the Master switch. Should it be always on when the master is on? Any way to power it of before disconnecting Master? (I?ve tried holding key 1 and reboots again)
Any similar experiences out there? Thanks in advance
Godo