AX-O
Well Known Member
How are you handling the stick interference and also the brace that typically goes along the bottom of the panel? I am looking to do the same but these are challenges in extending the panel down in the center region there that I am scratching my head over, can you post more pictures of how you dealt with this?
For more pics, look at the Picasa link in my signature.
Picture below shows the stick. No issues. The pannel was designed not to interfere with the stick. The red line is just there to hold the stick under the panel.
I removed the standard brace and moved the support a few inches closer to the fire wall. It also holds my avionics rack. If you look at the picture below (bottom of the pic, right off center), you will see a 3/4 inch angle that runs up and down (on the picture). Right behind the radios. It is a much much larger support compared to the original.
from the top
from the other side (behing the large multi-color wire harness)