Draker
Well Known Member
Has anyone with one of Garmin's COMM radios gotten the "Receiver Audio" function to work? From their manual:
This seems like a great option to wire up to a camera to record intercom audio, but in my install, I can't get it to output an actual audio signal. Garmin's support (who are always excellent and patient with me) are stumped on this one, and say it's a software problem. So I thought I'd ask here: Anyone else encountered and managed to fix this?
4.11 Receiver Audio
RECEIVER AUDIO OUT is a 40 mW audio output that is intended to drive a recording device or an audio panel.
RECEIVER AUDIO OUT supplies 40 mW (4.9 Vrms) into a 600Ω load, and is generally connected to the audio panel (if used). This output can also drive a recording device. When driving a recording device the output level will typically need to be reduced. The output level is controlled through configuration mode.
RECEIVER AUDIO OUT is the summation of the receiver audio, COM sidetone audio, intercom audio, and AUX audio.
RECEIVER AUDIO OUT is a 40 mW audio output that is intended to drive a recording device or an audio panel.
RECEIVER AUDIO OUT supplies 40 mW (4.9 Vrms) into a 600Ω load, and is generally connected to the audio panel (if used). This output can also drive a recording device. When driving a recording device the output level will typically need to be reduced. The output level is controlled through configuration mode.
RECEIVER AUDIO OUT is the summation of the receiver audio, COM sidetone audio, intercom audio, and AUX audio.
This seems like a great option to wire up to a camera to record intercom audio, but in my install, I can't get it to output an actual audio signal. Garmin's support (who are always excellent and patient with me) are stumped on this one, and say it's a software problem. So I thought I'd ask here: Anyone else encountered and managed to fix this?