scsmith
Well Known Member
I'm getting ready to buy some AKZO. I've used it before and I really like it. But I can not remember if I bought the reducer or not. I vaguely remember that it was about the right 'thinness' to spray directly mixed and I didn't need to reduce it. Is that right?
The reducer is pretty expensive, and if I can get by without it, I'll be happy.
I think in checking the search for past threads I found someone that had thinned it with lacquer thinner. Is that right? Surely not totally kosher, but hey, it is just primer on the interior of parts. Seems like any solvent that will flash off before the epoxy cures would have little effect on final properties.
The reducer is pretty expensive, and if I can get by without it, I'll be happy.
I think in checking the search for past threads I found someone that had thinned it with lacquer thinner. Is that right? Surely not totally kosher, but hey, it is just primer on the interior of parts. Seems like any solvent that will flash off before the epoxy cures would have little effect on final properties.