What mounting bracket are you using for the GAP-26? I've seen some versions that look like they were anodized and attached to the main spar, although i cant seem to find that one online. Garmin's version looks like you need to add an access panel and then mount it within that, so it would only be supported by the skin. not sure if that's an issue or not.
The instructions for the Gap-26 mention that it must be located within the first 25% of the wing cord from the leading edge for the AOA to work best. Does installing it just aft of the main spar meet that requirement or does it need to be installed in the outboard leading edge skin?
The instructions for the Gap-26 mention that it must be located within the first 25% of the wing cord from the leading edge for the AOA to work best. Does installing it just aft of the main spar meet that requirement or does it need to be installed in the outboard leading edge skin?