My airplane is at the hanger which is about 50 minutes from my home (welcome to the NY metro area...). Now I started building again which I do at my home for efficiency reasons. My RV which I maintain myself is at the airport. So the problem I am running into is that I am not only shuttling tools back and forth a lot but often the tool I need is in the wrong place which adds effectively a 2 hour time penalty to finishing the project.
I can't be the first one that ran into that issue. How do people solve this?
I thought I built myself a trailer with all the tools in it. Maybe even a workbench. Then I at least move all tools back and forth and I can finish any project either at the airport or at home. Right now my tools are "split" between the two... .
Any suggestions/pictures welcome!
Thx
Oliver
I can't be the first one that ran into that issue. How do people solve this?
I thought I built myself a trailer with all the tools in it. Maybe even a workbench. Then I at least move all tools back and forth and I can finish any project either at the airport or at home. Right now my tools are "split" between the two... .
Any suggestions/pictures welcome!
Thx
Oliver