I'm getting ready to fit the horizontal stab to the fuselage. One of the things I never did when I built the elevators was fit them to the horizontal stab, so I'm working on that now. Is it normal that the elevator control horns don't actually line up with each other when both counterbalance arms are even with the stabilizer? I don't see any obvious mistakes in the build (it was a couple of years ago, but if I recall, the control horn alignment was set by some pre-punched holes).
It's kind of funny to go back and look at my initial build items. Not exactly pretty! Functional, but I definitely see where the learning curve of riveting was!
It's kind of funny to go back and look at my initial build items. Not exactly pretty! Functional, but I definitely see where the learning curve of riveting was!