I'm working on a new panel design for my 6A and was planning on using Front Panel Express to do the cutting. I have the RV-6 panel DXF from Van's website, and the FPE design tool has a DXF import function. However, the import of the DXF from Van's results in errors.
I'm afraid I'm unfamiliar with CAD - at least with traditional 2D CAD. So... Is there anyone out there with enough CAD savvy to figure out the issues with the import? If so, I would be more than happy to provide them a reasonable quantity of their favorite beverage at OSH, or to give them a discount on a FlightBox or other Open Flight product.
Thanks in advance!
-S
![dxfimport.png](/proxy.php?image=https%3A%2F%2Fwww.openflightsolutions.com%2Ffiles%2Fdxfimport.png&hash=5e44efddf0126d16d4e1f2473707260d)
I'm afraid I'm unfamiliar with CAD - at least with traditional 2D CAD. So... Is there anyone out there with enough CAD savvy to figure out the issues with the import? If so, I would be more than happy to provide them a reasonable quantity of their favorite beverage at OSH, or to give them a discount on a FlightBox or other Open Flight product.
Thanks in advance!
-S