ShortSnorter
Well Known Member
Through all of my searches, it seems most folks that have reported challenges simply went off script and swapped the stock axle and wheel for an upgrade. I'd like to give the stock set up a try but and have a question about the bolt and washer stack.
The bolt is too short (-65) & I cannot find a longer (-66) one to replace it anywhere. Another option is to reduce the washer stack the plans prescribe:
2 x 062 25783054
2 x NAS1249F0663P
2 x NAS1149F0632P
If I reduce the washers, does it need to be done symmetrically on both sides (i.e. remove the same type and number of washer)?
The bolt is too short (-65) & I cannot find a longer (-66) one to replace it anywhere. Another option is to reduce the washer stack the plans prescribe:
2 x 062 25783054
2 x NAS1249F0663P
2 x NAS1149F0632P
If I reduce the washers, does it need to be done symmetrically on both sides (i.e. remove the same type and number of washer)?