I’m a couple of weeks away from attaching the bottom skins and am looking for advice in terms of the installation of other parts to save me work later on.
So far, my list includes:
1. ADS B Antenna
2. Heated pitot/controller
3. Pitot/AOA mast
I’ve installed the mounting boxes for the landing lights and plumbed the requisite wires for the ADHRS, AP TRIM, wing lights though they don’t have anything on the termination ends except the supplied pins. I also have an extra piece of conduit which doesn’t have anything except a pull string running inside.
As always, sage advice is always appreciated.
Thanks
Jt
So far, my list includes:
1. ADS B Antenna
2. Heated pitot/controller
3. Pitot/AOA mast
I’ve installed the mounting boxes for the landing lights and plumbed the requisite wires for the ADHRS, AP TRIM, wing lights though they don’t have anything on the termination ends except the supplied pins. I also have an extra piece of conduit which doesn’t have anything except a pull string running inside.
As always, sage advice is always appreciated.
Thanks
Jt