Trying to plan ahead on antenna placement in addition to other avionics that will be mounted aft of the baggage bulkhead. A few items I was planning:
A few questions:
1) The Aerosport valve/actuator mount on upper J-channel just aft of baggage bulkhead in the area I was planning a comm antenna. Will this cause an interference issue? I plan this comm to be my ground/#2. The primary will likely be belly mounted bent whip.
2) Proximity of magnetometer to comm antenna, NACA valve servo - going to be an issue?
- Garmin pitch/yaw servos
- 1 Comm antenna on top just aft of baggage bulkhead
- GPS antennae on top of FG cabin top down centerline (planning OH console)
- Garmin Magnetometer in Stein fuselage mount
- ELT Antenna under tail FG fairing
- Aerosport NACA vent valve kit
A few questions:
1) The Aerosport valve/actuator mount on upper J-channel just aft of baggage bulkhead in the area I was planning a comm antenna. Will this cause an interference issue? I plan this comm to be my ground/#2. The primary will likely be belly mounted bent whip.
2) Proximity of magnetometer to comm antenna, NACA valve servo - going to be an issue?
Last edited: