What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Blank Circuit Breaker Panel Cover Plate

Bart

Well Known Member
For the folks using a VPX or like system does anyone have a template or dimensions for the blank cover plate that needs to be created?
 
8 3/16 x 4 11/16, just another measuring point. You can order a blank fuse cover from Vans with the mounting holes pre-drilled if you don't want to make your own. That is what I did. I can't remember the part number though.
 
My dimensions came from the painted plate Stein sent with my panel. I used the Van’s plate that I had already painted, but it is on the airplane, so awkward to measure. The important dimensions are the screw hole spacings, anyway. :)
 
Back
Top