I recently purchased an RV-10. It has a small piece of wood glued to the right-hand side of the rudder (inducing left rudder). I noticed while flying it that I had to constantly apply right rudder to keep the ball in the center. So I removed the small static wooden rudder trim piece, added a mechanical rudder trim system $200 from Aerosport products. Flew it, trimmed it up and viola! I thought...problem solved. On to the next nit! Till next time I flew it. Now, when I fly it it needs a ton of left rudder. I cannot put enough left rudder into the Aerosport rudder trim system to overcome it.
What the **** is going on? Why is my trim need changing on a per-flight basis? It's as if I need that little wooden trim piece back on the rudder again.
Surely at least one of you has had this problem before.
What the **** is going on? Why is my trim need changing on a per-flight basis? It's as if I need that little wooden trim piece back on the rudder again.
Surely at least one of you has had this problem before.