snoop9erdog
Well Known Member
Trying to clarify my confusion....
Wiring One (1) Comm to two 10" screens.
If I wire up my only comm (GTR200B) per the G3x Installation manual page 29-3 Rev AE, "Single GTR20/GDU 460 Interconnect Drawing". It shows me connecting the Music and Audio (5 pins) to the GDU 460 Stereo & Audio. No problem there I get that.
The question is with the second MFD screen. Do I need to splice into the GTR pins and run to the MFD screen the same way.........or only connect to the PFD and the CAN BUS would communicate thru the PFD for the MFD?
Thx for any help.
Wiring One (1) Comm to two 10" screens.
If I wire up my only comm (GTR200B) per the G3x Installation manual page 29-3 Rev AE, "Single GTR20/GDU 460 Interconnect Drawing". It shows me connecting the Music and Audio (5 pins) to the GDU 460 Stereo & Audio. No problem there I get that.
The question is with the second MFD screen. Do I need to splice into the GTR pins and run to the MFD screen the same way.........or only connect to the PFD and the CAN BUS would communicate thru the PFD for the MFD?
Thx for any help.