Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Old 05-03-2019, 01:57 PM
amekler amekler is offline
Join Date: Aug 2009
Location: Gilford,NH
Posts: 85
Default ES-205203-3 0 pins

what tool is needed to remove these pins?
RV10 N668G
Building RV12 #120250
Reply With Quote
Old 05-03-2019, 05:42 PM
Mich48041 Mich48041 is offline
Join Date: Apr 2008
Location: Riley TWP MI
Posts: 3,022

Are you talking about D-Sub pins? If so, there is a Red/White Tool available from Stein and lots of other places. The tool breaks easily.
Joe Gores
RV-12 Flying
Reply With Quote
Old 05-04-2019, 04:50 PM
amekler amekler is offline
Join Date: Aug 2009
Location: Gilford,NH
Posts: 85

i found one.
Reply With Quote
Old 05-04-2019, 06:37 PM
wjb's Avatar
wjb wjb is offline
Join Date: Nov 2012
Location: Half Moon Bay, CA
Posts: 1,006

Get the red/white tool with the copper-colored (metal) inserts. You can often find all plastic versions (usually shipped along with a connector), but these barely work and not for very long.
Bill Bencze
N430WB RV-7 #74152 @ KHAF, tip-up; IO-360-M1B; Hartzell CS. !! Phase 1 !!
2357 hrs over 8.5 years to get to flying. Log at:
VAF 2020 donation happily made
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 03:54 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.