What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

RV Training Project by Flugplatzkind

Flugplatzkind

I'm New Here
Hello everybody,

my name is Markus and I started my training project a few days ago. A good friend of mine who is currently building his RV-7 suggested me to build the Training project. He said look at how good your skills are. I would like to share with you my progress and show you what I do. If you have any questions or suggestions write it in the comments.

My Training Project has arrived. So let the fun begin.
download


First I cut off and edited the stiffeners
download


After the stiffeners were finished I deburred the top and bottom skin. Finally I installed my first clecos :)
download
 
Last edited:
Congrats Markus. I had the same excitement when I built my practice project. Its a great ice breaker into the build world. Look forward to seeing it finished and your new outlook.
 
I enjoyed those projects. I built the tool box too. You learn a lot about the precess and about yourself. I learned I had to slow down, read the instructions until I was SURE I knew what we were doing and measure, check that, re measure and then cut.
You will enjoy the build.
Welcome aboard.
 
Back
Top