Does anyone know what material the .5 degree axle shims are made from, aluminum or steel?
I need one and don't want to wait a week to order it. I have a mill so it is no problem to quickly make one. The gear leg and axle are both aluminum so I would think aluminum would be ok for the shim, and easier to machine.
I'm also assuming they don't taper to "0" but maybe .015"
I need one and don't want to wait a week to order it. I have a mill so it is no problem to quickly make one. The gear leg and axle are both aluminum so I would think aluminum would be ok for the shim, and easier to machine.
I'm also assuming they don't taper to "0" but maybe .015"