What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Oil Filter Torque Adapter - DIY

Status
Not open for further replies.

BillL

Well Known Member
There was a recent thread on torquing filters and several comments on not having an adapter to reach the available swing space for the torque wrench. Here is a DIY wrench. A socket was split and welded to a bent bar. It allows easy torquing, if one is interested.

Pay attention to the clocking of the 1/2" drive to allow 90 deg orientation for a beam type wrench.

Note it is not one of the "I made from PVC" types.

Closing thread - see https://vansairforce.net/community/showpost.php?p=1461043&postcount=2
 
Last edited:
Status
Not open for further replies.
Back
Top