What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Yaw servo mount

SabreFlyr

Well Known Member
Sponsor
I've got the yaw servo mount kit (Section 58) which I'm thinking of installing in case I decide later to install the servo. (I also have the bow, which I understand was getting a little hard to come by.) Is there any reason that I shouldn't go ahead and install the mount now before I have the top on my tailcone? It'd be a whole lot easier to rivet now than later. I know that I'd have to wedge the bellcrank mount under the forward end of the yaw servo plate later in Section 36 but, with the two parts of the yaw servo mount (plate & support) clecoed in place, I can manage to wedge the bellcrank mount (still in its vinyl coat) under the plate and get it lined up without too much fuss.
 
Yaw damper mount

Installed the mount during the tailcone build but had to wait for the fuse kit to get the pitch servo mount that is an integral part of the yaw servo mount.
 
Back
Top