Colin,
Just installed a GTR 200 and it does play well with my Skyview, but doesn't quite play perfect.
The Skyview displays frequencies (and subsequently its matched identifiers) from the GTR but the GTR does not in-kind. For example, here in NW Florida I'll get KCEW 124.05 DEP and KCEW 119.275 ASOS on the Skyview but then 124.05 / COM ACTIVE and 119.275 COM STANDBY on the GTR. I thought the GTR would show something like KCEW DEP and KCEW ASOS below its frequencies. Is this how yours works?
When troubleshooting and looking at the GTR Config RS-232 page, the Tx() counter increments. The Rx() counter increments only when I make frequency changes.
Appreciate any insight.
Gregg, RV-6