NavyS3BNFO
Well Known Member
Question on the placement of the F-848 upper longeron gusset: Does the aft uppermost hole on the gusset sit between the tab on the center section assembly and the upper longeron or does it sit inboard of the tab on the center section assembly? See the two pics attached. It’s unclear from the plans - at least I couldn’t tell although I’m sure somewhere there is a good pic.
P.S. Disregard the 'R' in the photo. This is a pic of the left gusset.
P.S. Disregard the 'R' in the photo. This is a pic of the left gusset.