tectweaker
Well Known Member
I am finally getting to ADSB compliance and having an issue with getting ADSB working.
Garmin 330ES - Swapped from a 330 I had by my Local Shop
Garmin 530W - Updated to latest software by my Local Shop
We (with a A&P Friend) installed one wire from 530W -> 330ES (PIN 60 out to PIN 22 In) - Using the unused TAWS connecter
Setup the 530W for ADSB OUT + on COM 5
Setup the 330ES - RS.- COM1 IN to Remote; EMS - Enable; ADSB TX OUT - Enable; Sensitivity IE7
However, booting up - we get a NO ADSB on the top left corner
Any other settings that I need to look at - I am going to look at wiring again next....
Garmin 330ES - Swapped from a 330 I had by my Local Shop
Garmin 530W - Updated to latest software by my Local Shop
We (with a A&P Friend) installed one wire from 530W -> 330ES (PIN 60 out to PIN 22 In) - Using the unused TAWS connecter
Setup the 530W for ADSB OUT + on COM 5
Setup the 330ES - RS.- COM1 IN to Remote; EMS - Enable; ADSB TX OUT - Enable; Sensitivity IE7
However, booting up - we get a NO ADSB on the top left corner
Any other settings that I need to look at - I am going to look at wiring again next....