What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Slider rollbar

petehowell

Well Known Member
Hello,

The rollbar for my slider is too wide by about 3/8" I have put all my weight on it and it does not appear to have budged. Any suggestions? I used a calmp to squeeze it about 4" and that does not seem to have worked either. I'd hate to have to take a torch to it.

Pete
 
Mine fit great out of the box but my hangermate's 7 was off more than yours. The Van's powdercoating isn't anything to write home about, take a tourch to it. Don't worry about burning it. My buddies 7 came out great after an afternoon with a torch. Personally I wouldn't leave anything that sees use with just Van's powdercoating on it. I use PPG Concept and I think it's much better than the powdercoating from Van's.

Don't comprimise the fit of the roll bar and canopy for the sake of saving that crappy powdercoating.

Good luck
 
Back
Top