Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
boot for rear seat control stick
- Thread starter N605RV
- Start date
judoka5051
Well Known Member
Auto parts store!
I picked up a shifter boot from autozone!
I picked up a shifter boot from autozone!
fixnflyguy
Well Known Member
What I did..
There are some recent posts on this topic, and I shared my solution . All easy to make yourself, I fabricated a full closeout panel for the rear stick well, and a boot from left over seat leather. I did same for front. I cannot use web host picture sharing on my computer, so its hard for me to post pictures on here. Send me a PM with an email address and I will get you some pics. or look up my tail#76WE on G...gle images and you may see some I have shared. I also closed out my sidewalls to cover all the rudder cables, wiring and flap mechanisms...don't need a selfie from a jammed control system. Entire set of close-outs and sidewalls weighs about 2 lbs. Much cleaner and safer.
There are some recent posts on this topic, and I shared my solution . All easy to make yourself, I fabricated a full closeout panel for the rear stick well, and a boot from left over seat leather. I did same for front. I cannot use web host picture sharing on my computer, so its hard for me to post pictures on here. Send me a PM with an email address and I will get you some pics. or look up my tail#76WE on G...gle images and you may see some I have shared. I also closed out my sidewalls to cover all the rudder cables, wiring and flap mechanisms...don't need a selfie from a jammed control system. Entire set of close-outs and sidewalls weighs about 2 lbs. Much cleaner and safer.
