What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Van’s Stall Warning wiring

nanaimobrian

I'm New Here
The RV8 I purchased last year was built in 2012 and has the Vans Stall Warning Kit installed. An avionics upgrade was done in 2016. The aircraft has a Garmin 240 intercom panel. The stall warning is not functioning… the out line on the tone generator is cut. Can anybody give me an idea of how to connect the out line to the intercom or headsets? Thanks
 
Connect the tone generator to an unswitched aux input on the audio panel.
But, did your avionics upgrade include an efis with an angle of attack audio alert? If so, wire it to the audio panel instead, and throw away the original stall warning. The AOA is easily superior.
 
Connect the tone generator to an unswitched aux input on the audio panel.
But, did your avionics upgrade include an efis with an angle of attack audio alert? If so, wire it to the audio panel instead, and throw away the original stall warning. The AOA is easily superior.

..unfortunately...basic pitot ..just want to get the Vans system working...instead of adding 5 knots
 
Back
Top