Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Old 09-26-2020, 03:37 PM
SO FLYER SO FLYER is offline
Join Date: Jun 2020
Location: Jacksonville
Posts: 1
Default Dynon fuel pressure center

Replacing VDO with KAVLICO To all the wires have to go back to the dynon d180?
Reply With Quote
Old 09-26-2020, 07:14 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,429
Default Welcome to VAF

Carlos, welcome to VAF
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
Old 09-26-2020, 07:37 PM
RV10Pilot RV10Pilot is offline
Join Date: Jan 2005
Location: Medford, NJ USA
Posts: 284

You need 5 Volts power, Ground and the sensor line. Obviously the sensor line needs to go back to the EMS, but that wire is already attached to the VDO sensor. Ground is best to come from the EMS, but your forest of tabs would work. For power the Kavilco needs 5 Volts (not the 12 volts from your battery. Five volts is available from the EMS.
Reply With Quote
Old 09-27-2020, 07:05 AM
GalinHdz's Avatar
GalinHdz GalinHdz is offline
Join Date: Mar 2010
Location: KSGJ / TJBQ
Posts: 2,041

Originally Posted by SO FLYER View Post
Replacing VDO with KAVLICO To all the wires have to go back to the dynon d180?
For the Dynon EMS-220 you can use:

Pin 4 for Fuel Pressure
Pin 5 (and others) for GROUND
Pin 18 for +5vdc

FCC Radiotelephone (PG) with Radar Endorsement
2020 Donation made

Last edited by GalinHdz : 09-27-2020 at 07:10 AM.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 04:01 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.