What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

RV14 Quick Build fuselage - Canopy Cradle Assembly

design4p

Active Member
Hi,

Just wondering if any other builder of a RV14 Quick Build fuselage has come across the same problem I had.

I had a clonking sound when closing the canopy and after trying every conceivable solution I decided to remove the Canopy Cradle Assembly. This required being ambidextrous and a contortionist.

The fault was missing integral bushings in both the parts C-01439. Figure 2 on Page 35-20 RV14.

Van's support was very good and posted me 2 new C-01439 with the integrated bushings, however, during discussions, they could not believe that the two C-01439 had no bushings. They even asked me if I have removed the bushings - which I thought was a silly question.

You can view the clonking Noise at:

https://www.youtube.com/watch?v=EY2wC5bLJAQ

So I would be pleased to know if my experience with the RV14 Quick Build fuselage Canopy Cradle Assembly - No Bushings is unique or otherwise.

John
 
Back
Top