Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Old 09-10-2019, 03:08 PM
burgundyja's Avatar
burgundyja burgundyja is offline
Join Date: Nov 2006
Location: maple grove,mn
Posts: 244
Default Need help trig tt22

I just got the trig adsb bundle. I installed it and programed it but I am not getting any gps signal. After about 5mins I get a no gps warning. I have gone over the wiring 3 times. I do have 4.95 volt at the GPS cable. I have emailed trig support and they said it must be in the wiring and to email them after I find the problem. Is there a way to test the antenna? And yes I pull the airplane outside when I test it.
Mike Johnson
8A N484M
Reply With Quote
Old 09-10-2019, 03:44 PM
Walt's Avatar
Walt Walt is offline
Join Date: Aug 2005
Location: Dallas/Ft Worth, TX
Posts: 5,602

Suggest you make sure the setup configuration is correct.
Walt Aronow, DFW, TX (52F)

EXP Aircraft Services LLC
Specializing in RV Condition Inspections, Maintenance, Avionics Upgrades
Dynamic Prop Balancing, Pitot-Static Altmeter/Transponder Certification
FAA Certified Repair Station, AP/IA/FCC GROL, EAA Technical Counselor
Authorized Garmin G3X Dealer/Installer
RV7A built 2004, 1700+ hrs, New Titan IO-370, Bendix Mags
Website:, Email:, Cell: 972-746-5154
Reply With Quote
Old 09-10-2019, 03:59 PM
Patcullen550 Patcullen550 is offline
Join Date: May 2016
Location: Dayton oh
Posts: 17
Default Qma connector

Center conductor on qma connector needs to extend beyond the cup portion of connector. This was difficult for me to fabricate. Double check programming .good luck Pat
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 04:08 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.