What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Switch wiring

Michaelpk3

Well Known Member
Question....

Like an idiot I didn?t look at the wiring before replacing a switch.

Old switch failed so I bought a new on-off-on on Spruce.

The old switch when in the down position- everything off. Middle position - Nav lights on, up position- NAV and strobes on.

(4) wires - Nav Bus (12v), Strobe Bus (12v), Strobe switch and Nav switch.

I messed with it for a couple hours and couldn?t figure out the wiring. Anyone have a schematic or idea?
 
You were here today & didn?t mention it? Text me a picture of the old switch back & the new one.
 
Hi Michael
What you had was a 'progressive' switch. Note how the switch maintains a connection in the centre positions, which is different to the 'centre-off' switch you bought.


Progressive-vs-centre-off.jpg


I hope that helps!
 
Back
Top