View Single Post
  #23  
Old 10-11-2019, 10:33 AM
N941WR's Avatar
N941WR N941WR is offline
 
Join Date: Jan 2005
Location: SC
Posts: 12,887
Default

Quote:
Originally Posted by gmcjetpilot View Post
...
Moving blade pitch to a mechanical control in the cockpit (no electrical or hydraulics) on a spinning prop requires some kind of swash plate and linkage (like a helicopter). I don't know of anyone accusing helicopters of being simple. Again hydraulic is the standard because it has proven to be the best design.
...
Lycoming used to have a manually controlled prop, see my post above.

While I never flew with it, I am familiar with it.

The problem, as I understand it, is that the pilot needs to he careful not to over speed the engine. In flight, you essentially have a fixed pitch prop but depending on where it is set, it could be a climb or cruise prop, or anything in between. The blade angle did not change with RPM and/or manifold pressure.
__________________
Bill R.
RV-9 (Yes, it's a dragon tail)
O-360 w/ dual P-mags
Build the plane you want, not the plane others want you to build!
SC86 - Easley, SC
www.repucci.com/bill/baf.html
Reply With Quote