Dumbbell Daddy
Member
Good morning everyone and Merry Christmas. I’m going to start the sheet metal work on my Pitts in the near future. Was wondering if anyone (local-ish, Ontario, Barrie, GTA) has any unused tools laying around their hangar they might want to sell. Figured I try to buy used here before I look at ACS or across the border.
Specifically looking:
Sheet metal brake (30 in. or greater)
Sheet metal roller (30 in. Or greater)
Small Shrinker/stretcher
Rivet gun
Rivet Squeezer (hand or pneumatic)
Rivet set
Pop rivet tool/set
Bucking bars
Dimple dies and set
Countersink cage
Pneumatic die/angle grinder
Aviation L/C/R snips
Pneumatic shears
Cleco’s and cleco pliers
Pneumatic drill
Deburring tools
Hand seamers
Fluting pliers
Lol…..pretty much everything sold in a Van’s tool kit. Most of these aren’t essential but might be nice to have.
Thanks for your time.
Joe
Specifically looking:
Sheet metal brake (30 in. or greater)
Sheet metal roller (30 in. Or greater)
Small Shrinker/stretcher
Rivet gun
Rivet Squeezer (hand or pneumatic)
Rivet set
Pop rivet tool/set
Bucking bars
Dimple dies and set
Countersink cage
Pneumatic die/angle grinder
Aviation L/C/R snips
Pneumatic shears
Cleco’s and cleco pliers
Pneumatic drill
Deburring tools
Hand seamers
Fluting pliers
Lol…..pretty much everything sold in a Van’s tool kit. Most of these aren’t essential but might be nice to have.
Thanks for your time.
Joe
