The plans on page 25-06 call for reaming some holes in the fuselage bulkheads to .375. My Cleaveland Tools kit came with a .380 reamer, not a .375. Is it OK to use the .380 reamer here??
Thanks for the reply.Cleaveland labels their 0.375" straight flute reamer RSF380 (i.e. 3/8"), so it might actually be 0.375". https://www.cleavelandtool.com/prod...1&_sid=192e0ef01&_ss=r&variant=31450373193790
Believe me, I don't take shortcuts! I've spent over $10,000 on tools so far. It's also why I asked the question even though the difference is only .005.Never take a short-cut. Find something else to work on until you acquire the correct sized reamer.