[Scott Will]

Does anyone know what size screws are used to hold the DB connectors on the radio backplates? I didn't get any with one of my 'pre-owned' audio panel or transponder (GMA-340 and GTX-327).

Thanks much in advance.

 

[rv6ejguy]

DB connectors usually use 4-40 screws.

 

[SteinAir]

Correct....that's what they normally are (4-40's). If you need a few spares, we have an extra couple thousand laying around in our "junk" box. We accumulate quite a few of these when building up all the Dynon and Trutrak harnesses as we provide our own thumbscrews in place of the small 4-40's.....

Drop me a line off list if you want some and we'll toss them in an envelope and send them on their way.

Cheers,
Stein.

 

[Kahuna]

4-40

Does anyone know what size screws are used to hold the DB connectors on the radio backplates? I didn't get any with one of my 'pre-owned' audio panel or transponder (GMA-340 and GTX-327).

Thanks much in advance.

Scott you can get a bag of em from Rat Shack, or Home Depot. I usually have to cut em down with a dremel.

Kahuna